Osciloscópio com alta taxa de amostragem Pico série 6000. Osciloscópio com alta taxa de amostragem da serie 6000 com modelos com 250 MHz a 500 MHz bandas analógicas complementadas por uma taxa de amostragem em tempo real de 5 GS / s, que podem exibir pulsos single shot com resolução de tempo de 200 ps. Modo de amostragem de tempo equivalente (ETS) que aumenta a taxa de amostragem máxima para 50 GS / s, dando uma resolução de temporização ainda mais finas, de 20 ps para sinais repetitivos.
Osciloscópio com alta taxa de amostragem Pico série 6000
Osciloscópio com alta taxa de amostragem Pico série 6000, PicoScope da série 6000 possui memória buffer mais profunda que são disponíveis dentro da configuração em qualquer osciloscópio ou preço desta série . O SuperSpeed USB 3.0 interface e hardware de aceleração garante que a exposição é suave e sensível, mesmo com capturas de comprimento. Outros osciloscópios têm altas taxas máximas de amostragem, mas sem memória profunda que não pode sustentar essas taxas em timebases longos. O tampão de amostra de 2 giga no PicoScope 6404D pode conter dois 200 ms captura na taxa de amostragem máxima de 5 GS / s. Para ajudar a gerenciar todos esses dados, PicoScope pode ampliar até 100 milhões de vezes usando uma escolha de dois métodos de zoom. Existem botões de zoom, bem como uma janela panorâmica que permite zoom e reposicionar a tela, simplesmente arrastando com o mouse.
| Osciloscópio com alta taxa de amostragem – vertical | ||||||
|---|---|---|---|---|---|---|
| Model | PicoScope 6402C | PicoScope 6402D | PicoScope 6403C | PicoScope 6403D | PicoScope 6404C | PicoScope 6404D |
| Input channels | 4 | |||||
| Bandwidth* (-3 dB) |
250 MHz (200 MHz ±50 mV range) |
350 MHz (250 MHz ±50 mV range) |
500 MHz (all ranges) |
|||
| Hardware bandwidth limiter | Switchable, 20 MHz | Switchable, 25 MHz | ||||
| Rise time (10%–90%, calculated) | 1.4 ns (50 mV range 1.8 ns) | 1.0 ns (50 mV range 1.4 ns) | 0.7 ns (all ranges) | |||
| Input type | Single-ended, BNC connector | |||||
| Resolution | 8 bits | |||||
| Enhanced resolution | 12 bits | |||||
| Input sensitivity | 10 mV/div to 4 V/div at x1 zoom (1 MΩ input) 10 mV/div to 1 V/div at x1 zoom (50 Ω input) |
|||||
| Input ranges (full scale) | ±50 mV to ±20V, in 9 ranges (1 MΩ input) ±50 mV to ±5V, in 7 ranges (50 Ω input) |
|||||
| Input coupling | AC, DC or 50 Ω DC, software-selectable | |||||
| Input characteristics | 1 MΩ in parallel with 15 pF (AC or DC coupling) or 50 Ω (DC coupling) | 1 MΩ in parallel with 10 pF (AC or DC coupling) or 50 Ω (DC coupling) | ||||
| DC accuracy | ±3% of full scale | |||||
| Analog offset range (vertical position adjust) | ±50 mV to ±200 mV ranges ±500 mV range ±1 V range ±2 V range ±5 V range ±10 V range ±20 V |
±0.5 V ±2.5 V ±2.5 V ±2.5 V ±20 V (50 Ω ±0.5 V) ±20 V ±20 V |
±2 V ±10 V (50 Ω ±5 V) ±10 V (50 Ω ±4.5 V) ±10 V (50 Ω ±3.5 V) ±35 V (50 Ω ±0.5 V) ±30 V ±20 V |
|||
| Overvoltage protection | ±100 V to ground (1 MΩ inputs), 5.5 V RMS (50 Ω inputs) | |||||
*Quoted bandwidth is with supplied probes or at BNC when 50 Ω impedance selected
| Osciloscópio com alta taxa de amostragem – horizontal | ||||||
|---|---|---|---|---|---|---|
| Maximum sampling rate (single-shot) 1 channel in use 2 channels in use 3 or 4 ch. in use |
5 GS/s 2.5 GS/s 1.25 GS/s |
|||||
| Maximum sampling rate (repetitive signals, ETS mode) | 50 GS/s | |||||
| Maximum sampling rate (continuous streaming mode) |
10 MS/s using PicoScope. >150 MS/s using the supplied SDK (PC-dependent) | |||||
| Timebase ranges Real-time ETS |
1 ns/div to 5000 s/div 50 ps/div to 100 ns/div |
|||||
| Buffer memory (shared between active channels) |
256 MS | 512 MS | 512 MS | 1 GS | 1 GS | 2 GS |
| Streaming buffer memory (PicoScope) | 100 MS | |||||
| Streaming buffer memory (SDK) | Up to available PC memory | |||||
| Maximum buffer segments (PicoScope) | 10,000 | |||||
| Maximum buffer segments (using SDK) | 250,000 | 500,000 | 500,000 | 1,000,000 | 1,000,000 | 2,000,000 |
| Maximum waveforms per second | 170,000 wfm/s (PC-dependent) | |||||
| Timebase accuracy | ±2 ppm | |||||
| Timebase ageing | 1 ppm per year | |||||
| Osciloscópio com alta taxa de amostragem – Dynamic performance (typical) | ||||||
|---|---|---|---|---|---|---|
| Crosstalk | 17 000:1 typical at 20 MHz 1000:1 typical at full bandwidth |
5600:1 typical at 20 MHz 560:1 typical at full bandwidth |
||||
| Harmonic distortion | –55 dB typical | –54 dB typical | ||||
| SFDR | 60 dB typical | 55 dB typical | ||||
| Noise | 200 μV RMS (50 mV range) | 320 μV RMS (50 mV range) | ||||
| Osciloscópio com alta taxa de amostragem – Triggering (general) | ||||||
|---|---|---|---|---|---|---|
| Trigger modes | Free run, single, repeat, auto, rapid, ETS | |||||
| Maximum pre-trigger capture | Up to 100% of capture size | |||||
| Maximum post-trigger delay | Up to 4 billion samples | |||||
| Maximum trigger rate | Up to 10,000 waveforms in a 10 ms burst | |||||
| Rearm time | Less than 1 µs on fastest timebase | |||||
| Pulse width trigger | Settable with 1 sample resolution from 1 sample (minimum 200 ps) up to 4 billion sample intervals | |||||
| Triggering (analog inputs) | ||||||
|---|---|---|---|---|---|---|
| Trigger types | Rising or falling edge with adjustable hysteresis, pulse width, window, window pulse width, dropout, window dropout, delay, interval, level, logic, runt pulse | |||||
| Trigger sources | Channels A to D, AUX | |||||
| Trigger level | Adjustable over whole of selected voltage range | |||||
| Trigger sensitivity | 1 LSB accuracy up to full bandwidth of scope | |||||
| Auxiliary trigger input (AUX) | ||||||
|---|---|---|---|---|---|---|
| Trigger types | Edge, pulse width, dropout, interval, logic | |||||
| Input characteristics | 50 Ω ±1%, DC coupled | |||||
| Input type | Rear-panel BNC, shared with reference clock input | |||||
| Threshold range | ±1 V | |||||
| Bandwidth | 25 MHz | |||||
| Overvoltage protection | ±5 V (DC + AC peak) | |||||
| Reference clock input (SDK only) | ||||||
|---|---|---|---|---|---|---|
| Clock input characteristics | 50 Ω, BNC, ±1 V, DC coupled | |||||
| Frequency range | 5, 10, 20, 25 MHz, user-selectable | |||||
| Connector | Rear-panel BNC, shared with AUX trigger | |||||
| Level | Adjustable threshold, ±1 V | |||||
| Overvoltage protection | ±5 V | |||||
| Probe compensation output | ||||||
|---|---|---|---|---|---|---|
| Impedance | 600 Ω | |||||
| Frequency | 1 kHz square wave | |||||
| Level | 2 V pk–pk | |||||
| Function generator | ||||||
|---|---|---|---|---|---|---|
| Standard waveforms C models D models |
Sine, square, triangle, DC level As C models plus ramp (up/down), sin (x)/x, Gaussian, half–sine, white noise, PRBS |
|||||
| Frequency range | DC to 20 MHz | |||||
| Frequency accuracy | Same as scope timebase accuracy | |||||
| Frequency resolution | < 0.05 Hz | |||||
| Sweep modes | Up, down, dual | |||||
| Signal generator triggering | Scope, manual, or AUX input; programmable number of cycles from 1 to 1 billion | |||||
| Amplitude range | 250 mV to 2 V pk | |||||
| Offset adjustment | ±1 V | |||||
| Output voltage limits | –2.5 V to +2.5 V | |||||
| DC accuracy | ±1% of full scale | |||||
| Connector type | Rear-panel BNC | |||||
| Output impedance | 50 Ω | |||||
| Overvoltage protection | ±5 V | |||||
| Function generator and arbitrary waveform generator | ||||||
|---|---|---|---|---|---|---|
| Update rate | n/a | 200 MS/s | n/a | 200 MS/s | n/a | 200 MS/s |
| Buffer size | n/a | 64 kS | n/a | 64 kS | n/a | 64 kS |
| Resolution | n/a | 12 bits | n/a | 12 bits | n/a | 12 bits |
| Spectrum analyzer | ||||||
|---|---|---|---|---|---|---|
| Frequency range | DC to 250 MHz | DC to 350 MHz | DC to 500 MHz | |||
| Display modes | Magnitude, peak hold, average | |||||
| Windowing functions | Rectangular, Gaussian, triangular, Blackman, Blackman–Harris, Hamming, Hann, flat-top | |||||
| Number of FFT points | From 128 to 1,048,576 | |||||
| Scale / units | X axis : linear or log 10 Y axis : logarithmic (dbV, dBu, dBm, arbitrary) or linear (volts) |
|||||
| Math channels | |
|---|---|
| General functions | −x, x+y, x−y, x*y, x/y, x^y, sqrt, exp, ln, log, abs, norm, sign, sin, cos, tan, arcsin, arccos, arctan, sinh, cosh, tanh, derivative, integral, delay |
| Filter functions | Low pass, high pass, band stop, band pass |
| Graphing functions | Frequency, duty cycle |
| Multi-waveform functions | Min, max, average, peak |
| Operands | Input channel, reference waveforms, time, constants, pi |
| Automatic measurements | |
|---|---|
| Scope mode | AC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak to peak, rise time, rising rate. |
| Spectrum mode | Frequency at peak, amplitude at peak, average amplitude at peak, total power, THD %, THD dB, THD+N, SFDR, SINAD, SNR, IMD |
| Statistics | Minimum, maximum, average and standard deviation |
| Serial decoding | |||||
|---|---|---|---|---|---|
| Protocols | CAN, LIN, I²C, UART/RS-232, SPI, I²S, FlexRay | ||||
| Inputs | All input channels with any mixture of protocols | ||||
| Mask limit testing | |
|---|---|
| Mask generation | Auto generate from captured waveform, manual drawing, manual coordinate entry |
| Actions | Highlight on screen, select in buffer overview, activate alarm |
| Statistics | Pass/fail, failure count, total count |
| Alarms | |
|---|---|
| Initiating events | Capture, buffer full, mask fail |
| Alarm actions | Beep, play sound, stop/restart capture, run executable, save current buffer/all buffers, trigger signal generator |
| Display | |||||
|---|---|---|---|---|---|
| Interpolation | Linear or sin(x)/x | ||||
| Persistence modes | Digital color, analog intensity, fast, custom | ||||
| Data export | |
|---|---|
| Output file formats | BMP, CSV, GIF, JPG, MATLAB 4, PDF, PNG, PicoScope data, PicoScope settings, TXT |
| Output functions | Copy to clipboard, print |
| Environmental | ||
|---|---|---|
| Temperature range (operating) | 0 °C to 40 °C | |
| Temperature range (stated accuracy) | 20 °C to 30 °C | |
| Temperature range (storage) | –20 °C to +60 °C | |
| Humidity range (operating) | 5% to 80% RH non-condensing | |
| Humidity range (storage) | 5% to 95% RH non-condensing | |
| Physical properties | ||||||
|---|---|---|---|---|---|---|
| Dimensions | 255 x 170 x 40 mm (approx 10 x 6.7 x 1.6 in) |
280 x 170 x 40 mm (approx 11 x 6.7 x 1.6 in) |
||||
| Weight | 1 kg (approx 2 lb 3 oz) |
1.3 kg (approx 2 lb 14 oz) |
||||
| Software | ||
|---|---|---|
| Windows software | PicoScope for Windows Software development kit (SDK) Windows 7, 8 or 10 recommended (read more) |
|
| Mac OS X software | PicoScope for Mac OS X (beta) Software development kit (SDK) Mac OS X version 10.9 or 10.10 recommended |
|
| Linux software | PicoScope for Linux (beta) Software development kit (SDK) See Linux Software & Drivers for details of supported distributions |
|
| Languages | Chinese (simplified), Chinese (traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Romanian, Russian, Spanish, Swedish, Turkish | |
| General | ||||||
|---|---|---|---|---|---|---|
| Additional hardware (supplied) | Four factory-compensated oscilloscope probes, USB 3.0 cable, universal mains (AC) power supply, mains lead (power cord), carry case, user manuals and software CD-ROM | |||||
| PC requirements | Microsoft Windows 7, 8 and 10* (not Windows RT) | |||||
| PC interface | USB 3.0 (USB 2.0 and USB 1.1 compatible; USB 1.1 not recommended) | |||||
| Power supply AC adaptor |
12 V @ 4 A External adaptor supplied (suitable for USA, UK, Europe and Australasia) |
|||||
| Safety approvals | European LVD standard | |||||
| EMC approvals | European EMC standard FCC Rules Part 15 Class A |
|||||
| Environmental approvals | RoHS compliant | |||||
| Total satisfaction guarantee | In the event that this product does not fully meet your requirements you can return it for an exchange or refund. To claim, the product must be returned in good condition within 14 days. | |||||
Clique em assuntos relacionados com sua pesquisa
Osciloscópio digital educacional Inove PO1022C
Osciloscópio tipo caneta Pico 2105
Osciloscópio com gerador arbitrário via USB série Pico 2200
Osciloscópio MSO com gerador arbitrário e analise lógica em um
Osciloscópio PC Picotech da série 3000
BK 2190D Osciloscópio digital 100MHz
Osciloscópio de armazenamento digital BK 2190E
Osciloscópio de campo com canal isolado serie 2510 da BK Precision
Osciloscópio de armazenamento digital BK 2190E
Osciloscópio Tektronix TBS1000 bandas entre 25 e 150MHz
TDS 2000 C osciloscópios Tektronix de 50MHz a 200MHz
Osciloscópio com alta taxa de amostragem Pico série 6000 é na PerCon
Osciloscópio com alta taxa de amostragem Pico série 6000 pode ser encontrado na PerCon Tecnologia sediada na Rua Hermengarda 60 – Sala 605 -Torre do Meier – Meier – Rio de Janeiro – RJ (percon@acessopercon.com.br) / Fone : 21-2596-8369
Clique aqui para obter mais informação sobre este produto
