Osciloscópio com resolução vertical flexível fabricados pela Pico Technology ganhou o prêmio Elektra 2013 para produtos de teste que é anualmente apresentado no evento europeu de reconhecimento de indústrias eletrônicas em Londres. O PicoScope da série 5000 foi escolhido por unanimidade por um júri composto por imprensa especializada , especialistas da indústria e da pesquisa acadêmica , que se manifestaram impressionado pela forma que este produto desafiou a abordagem tradicional de um osciloscópio com características inovadoras e alta versatilidade. O PicoScope 5000 concorreu contra grandes e tradicionais fabricantes de equipamentos de teste não deixando dúvidas sobre sua superioridade.
Nós encorajamos você a solicitar maiores informações sobre as características e beneficio da serie 5000 com destaque para a exclusiva resolução vertical flexível que pode fazer amostragens em sinais a partir de 1GS/s com resolução de 8 bits até 125 MS / s com 14 -bits.
Osciloscópio com resolução vertical flexível (características técnicas)
Osciloscópio com resolução vertical flexível – PicoScope série 5000 Series
| Oscilloscope – vertical | ||
|---|---|---|
| Number of channels | 2 (Osciloscópio com resolução vertical flexível – PicoScope 5200 models) 4 (Osciloscópio com resolução vertical flexível – PicoScope 5400 models) |
|
| Bandwidth (–3 dB)* | 60 MHz (PicoScope 5242A, 5242B, 5442A and 5442B models) 100 MHz (PicoScope 5243A, 5243B, 5443A and 5443B models) 200 MHz (PicoScope 5244A, 5244B, 5444A and 5444B models) |
|
| Hardware bandwidth limiter (−3 dB) | 20 MHz, switchable | |
| Rise time (calculated, 10% to 90%) |
5.8 ns (60 MHz models) 3.5 ns (100 MHz models) 1.8 ns (200 MHz models) |
|
| Input type | BNCs on front panel | |
| Resolution** | 8, 12, 14, 15 and 16 bits selectable in hardware | |
| Enhanced resolution | Hardware resolution + 4 bits | |
| Input sensitivity | 2 mV/div to 4 V/div (10 vertical divisions) | |
| Input ranges (full scale) | ±10 mV to ±20 V full scale, in 11 ranges | |
| Input coupling | AC or DC, software-selectable | |
| Input characteristics | 1 MΩ ±1% || 13 pF, ±1 pF | |
| DC accuracy ±50 mV to ±20 V ranges, ≥ 12-bit mode ±50 mV to ±20 V ranges, 8-bit mode ±10 mV and ±20 mV ranges |
±0.25% typical @ 25°C (±1% of full scale max @ 20 to 30°C)±1% typical @ 25°C (±3% of full scale max @ 20 to 30°C)
±2% typical @ 25°C (±5% of full scale max @ 20 to 30°C) |
|
| Analog offset range (vertical position adjust) | ±250 mV (10, 20, 50, 100, 200 mV ranges), ±2.5 V (500 mV, 1 V, 2 V ranges), ±20 V (5, 10, 20 V ranges) |
|
| Overvoltage protection | ±100 V (DC + AC peak) | |
* Note: in 16 bit mode, bandwidth is limited to 60 MHz
** Maximum effective resolution is limited on the lowest voltage ranges: ±10 mV = 8 bits • ±20 mV = 12 bits. All other ranges can use full resolution.
| Osciloscópio com resolução vertical flexível – horizontal | |||||
|---|---|---|---|---|---|
| Maximum sampling rate (real-time) Any 1 channel Any 2 channels Any 3 channels Four channels |
8-bit mode1 GS/s 500 MS/s 250 MS/s 250 MS/s |
12-bit mode500 MS/s 250 MS/s 125 MS/s 125 MS/s |
14-bit mode125 MS/s 125 MS/s 125 MS/s 125 MS/s |
15-bit mode125 MS/s 125 MS/s – – |
16-bit mode62.5 MS/s – – – |
| Maximum sampling rate (ETS mode for repetitive signals, 8-bit mode only) | 2.5 GS/s (60 MHz models) 5 GS/s (100 MHz models) 10 GS/s (200 MHz models) |
||||
| Maximum sampling rate (continuous streaming mode) | 10 MS/s in PicoScope 6. >10 MS/s using supplied API (PC-dependent) | ||||
| Timebase ranges | 2 ns/div to 5000 s/div (60 MHz models) 1 ns/div to 5000 s/div (100 MHz models) 500 ps/div to 5000 s/div (200 MHz models) |
||||
| Buffer memory** (8-bit mode) | 16 MS to 512 MS: see Configure Your Scope | ||||
| Buffer memory** (≥ 12-bit) | Buffer memory for ≥ 12-bit is halved | ||||
| Streaming buffer memory** (PicoScope) | 100 MS | ||||
| Maximum buffer segments (PicoScope) | 10,000 | ||||
| Maximum waveforms per second | 130,000 (PC-dependent) | ||||
| Timebase accuracy (drift) | ±50 ppm (±5 ppm/year) (60 MHz models) ±2 ppm (±1 ppm/year) (100 MHz and 200 MHz models) |
||||
| Sample jitter | 3 ps RMS, typical | ||||
** Shared between active channels
| Dynamic performance (typical; analog channels) | ||
|---|---|---|
| Crosstalk | Better than 400:1 up to full bandwidth (equal voltage ranges) | |
| Harmonic distortion | 8-bit mode: > 60 dB at 100 kHz full scale input ≥ 12-bit mode:> 70 dB at 100 kHz full scale input |
|
| SFDR | 8 and 12-bit: > 60 dB at 100 kHz full scale input 14 to 16-bit: > 70 dB at 100 kHz full-scale input |
|
| Noise (on 50 mV range) | 8-bit mode 120 μV RMS 12-bit mode 110 μV RMS 14-bit mode 100 μV RMS 15-bit mode 85 μV RMS 16-bit mode 70 μV RMS |
|
| Bandwidth flatness | (+0.3 dB, –3 dB) from DC to full bandwidth | |
| Triggering (general) | ||
|---|---|---|
| Modes | Free run, auto, repeat, single, ETS, rapid (segmented memory) | |
| Maximum pre-trigger capture | 100% of capture size | |
| Maximum post-trigger capture | 4 billion samples | |
| Trigger rearm time | < 2 μs on fastest timebase | |
| Maximum trigger rate | Up to 10,000 waveforms in a 20 ms burst | |
| Triggering (analog inputs) | ||
|---|---|---|
| Trigger types | Rising and falling edge with adjustable hysteresis, pulse width, dropout, window, delay, logic | |
| Level | All trigger levels, window levels and hysteresis values settable with 1 LSB resolution across input range | |
| Sensitivity | Digital triggering provides 1 LSB accuracy up to full bandwidth of scope | |
| Trigger types (ETS mode) | Rising, falling | |
| Sensitivity (ETS mode) | Typical 10 mV p-p at full bandwidth | |
| Pulse width trigger | Settable with 1 sample resolution from 1 sample (minimum 1 ns) up to 4 billion sample intervals | |
| External trigger input | ||
|---|---|---|
| Trigger types | Edge, pulse width, dropout, interval, logic | |
| Input characteristics | 1 MΩ ±1% || 13 pF ±1 pF | |
| Input type | Front panel BNC | |
| Threshold range | ±5 V, DC coupled | |
| Bandwidth | DC to full oscilloscope bandwidth (60, 100 or 200 MHz) | |
| Overvoltage protection | ±100 V (DC + AC peak) | |
| Probe compensation output | ||
|---|---|---|
| Output characteristics | 600 Ω | |
| Output frequency | 1 kHz | |
| Output level | 3 V pk-pk | |
| Overvoltage protection | 10 V | |
| Function generator (fitted to all models) | ||
|---|---|---|
| Standard output signals | Sine, square, triangle, DC voltage | |
| Standard signal frequency | DC to 20 MHz | |
| Sweep modes | Up, down, dual | |
| Frequency accuracy | ±50 ppm (±5 ppm/year) (60 MHz models) ±2 ppm (±1 ppm/year) (100 MHz and 200 MHz models) |
|
| Frequency resolution | < 0.05 Hz | |
| Voltage range | ±2 V with ±1% DC accuracy | |
| Amplitude and offset adjustment | Adjustable in approx. 0.25 mV steps within overall ±2 V range | |
| Amplitude flatness | < 2 dB to 20 MHz, typical @ 50 Ω load | |
| SFDR | > 70 dB, 10 kHz full scale sine wave | |
| Connector type | BNC | |
| Output characteristics | 50 Ω output impedance | |
| Overvoltage protection | ±20 V | |
| Arbitrary waveform generator (B models only) | ||
|---|---|---|
| Update rate | 200 MS/s | |
| Buffer size | 16 kS (PicoScope 5242B and 5442B) 32 kS (PicoScope 5243B and 5443B) 48 kS (PicoScope 5244B and 5444B) |
|
| Resolution | 14 bits (output step size approximately 0.25 mV) | |
| Bandwidth | > 20 MHz | |
| Rise time (10% to 90%) | < 10 ns | |
| Spectrum analyzer | ||
|---|---|---|
| Frequency range | DC to full oscilloscope bandwidth (60, 100 or 200MHz) | |
| Display modes | Magnitude, average, peak hold | |
| Windowing functions | Rectangular, Gaussian, triangular, Blackman, Blackman–Harris, Hamming, Hann, flat-top | |
| Number of FFT points | Selectable from 128 to 1 million in powers of 2 | |
| Scale / units | X axis : linear or log 10 Y axis : logarithmic (dbV, dBu, dBm, arbitrary) or linear (volts) |
|
| Math channels | |
|---|---|
| General functions | −x, x+y, x−y, x*y, x/y, x^y, sqrt, exp, ln, log, abs, norm, sign, sin, cos, tan, arcsin, arccos, arctan, sinh, cosh, tanh, derivative, integral, delay |
| Filter functions | Low pass, high pass, band stop, band pass |
| Graphing functions | Frequency, duty cycle |
| Multi-waveform functions | Min, max, average, peak |
| Operands | Input channel, reference waveforms, time, constants, pi |
| Automatic measurements | ||
|---|---|---|
| Oscilloscope | AC RMS, true RMS, DC average, cycle time, frequency, duty cycle, falling rate, fall time, rising rate, rise time, high pulse width, low pulse width, maximum, minimum, peak to peak |
|
| Spectrum | Frequency at peak, amplitude at peak, average amplitude at peak, total power, THD %, THD dB, THD+N, SFDR, SINAD, SNR, IMD |
|
| Statistics | Minimum, maximum, average and standard deviation | |
| Serial decoding | |||||
|---|---|---|---|---|---|
| Protocols | I²C, I²S, SPI, RS-232/UART, CAN, LIN, FlexRay | ||||
| Inputs | All input channels with any mixture of protocols | ||||
| Mask limit testing | |
|---|---|
| Mask generation | Auto generate from captured waveform, manual drawing, manual coordinate entry |
| Actions | Highlight on screen, select in buffer overview, activate alarm |
| Statistics | Pass/fail, failure count, total count |
| Alarms | |
|---|---|
| Initiating events | Capture, buffer full, mask fail |
| Alarm actions | Beep, play sound, stop/restart capture, run executable, save current buffer/all buffers, trigger signal generator |
| Display | ||
|---|---|---|
| Interpolation | Linear or sin(x)/x | |
| Persistence modes | Digital color, analog intensity, fast, custom | |
| Data export | |
|---|---|
| Output file formats | BMP, CSV, GIF, JPG, MATLAB 4, PDF, PNG, PicoScope data, PicoScope settings, TXT |
| Output functions | Copy to clipboard, print |
| Environmental | ||
|---|---|---|
| Temperature range (operating) | 0 °C to 40 °C | |
| Temperature range (stated accuracy) | 20 °C to 30 °C | |
| Temperature range (storage) | –20 °C to +60 °C | |
| Humidity range (operating) | 5% to 80% RH non-condensing | |
| Humidity range (storage) | 5% to 95% RH non-condensing | |
| Physical properties | |
|---|---|
| Dimensions | 190 x 170 x 40 mm (including connectors) |
| Weight | < 0.5 kg |
| Software | ||
|---|---|---|
| Windows software | PicoScope for Windows Software development kit (SDK) Windows 7, 8 or 10 recommended |
|
| Mac OS X software | PicoScope for Mac OS X (beta) Software development kit (SDK) Mac OS X version 10.9 or 10.10 recommended |
|
| Linux software | PicoScope for Linux (beta) Software development kit (SDK) See Linux Software & Drivers for details of supported distributions |
|
| Languages | Chinese (simplified), Chinese (traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Romanian, Russian, Spanish, Swedish, Turkish | |
| Osciloscópio com resolução vertical flexível | ||||||
|---|---|---|---|---|---|---|
| Additional hardware (supplied) | USB cable, probes in probe case, AC adaptor (4-channel models only) | |||||
| PC connectivity | USB 2.0 hi-speed (USB 1.1 and USB 3.0 compatible; USB 1.1 not recommended) | |||||
| Power requirements | 1 A (2 channels) from 2 USB ports or 1.5 A at 5 V (up to 4 channels) from AC adaptor | |||||
| Environment | Dry locations only; up to 2000 m altitude | |||||
| Safety approvals | Designed to EN 61010-1:2010 | |||||
| EMC approvals | Tested to EN61326-1:2006 and FCC Part 15 Subpart B | |||||
| Environmental approvals | RoHS and WEEE compliant | |||||
| Total satisfaction guarantee | In the event that this product does not fully meet your requirements you can return it for an exchange or refund. To claim, the product must be returned in good condition within 14 days. | |||||
Osciloscópio com resolução vertical flexível é na PerCon
Osciloscópio com resolução vertical flexível pode ser encontrado na PerCon Tecnologia sediada na Rua Hermengarda 60 – Sala 605 -Torre do Meier – Meier – Rio de Janeiro – RJ (percon@acessopercon.com.br) / Fone : 21-2596-8369
Clique aqui para comprar este produto
